Top 5 Easy Fixes for a Clogged Toilet
So you sit on that toilet because your tummy aches or it is just a part of your morning routine before you take a shower. It does not always follow that when you are done defecating and urinating, the waste can be flushed down. Not at all times. Seriously, a clogged toilet can ruin your day.
To be prepared with easy solutions when faced by that problem, you have landed on the right page.
First thing to do, though, is to ask: Why is that happening? A blocked drain for a toilet can be a minor problem, but it is not always a guarantee. There are major toilet issues that have been brewed from months and years of settling of some debris inside the pipeline underneath your favourite comforting seat.
If that is a major issue you think, better call for a plumbing professional. If you’re not sure yet if it’s a minor or major problem, try these tips to handle that dilemma.
- Hot water is your friend
A blockage is often associated with a very low water level inside the toilet bowl. Pouring hot water into it can be a problem solver by dissolving any blockage that’s preventing your faeces from plunging down.
Here is a warning, though: Never use a boiling water. It can damage the surface of your toilet. Use the water from hot tap.
After pouring the thing down, wait at least five minutes before checking if the clog has dissolved.
- Dish soap can help
Is the hot water not enough? Try the dish soap. Three or four squirts of this item may help in dissolving the clogs that hot water alone cannot make.
Is it still clogged? Wait for five minutes first before assessing.
- Pick the plunger
Ten minutes have passed and the hot water and dish soap have yet to solve the problem. The third great thing to do is to pick that plunger out of its cabinet and use it for the toilet.
You may be wondering what kind of a plunger you need the most to use for the toilet. It’s the funnel-cup plunger, which has more flange on its end. Do not be frustrated if you do not have that one, though. Any plunger will do as long as it can pinch.
- Seal is what you need to create
When you place the plunger over the draining hole, take a look at the water in the bowl. You know you are doing it right when the water is at least partway up the plumbing tool’s sides. If that is what you see, you may start the work:
- Push the plunger, pull the plunger
Push the plunger down firmly, while not breaking the seal you’ve created. Then, pull it up immediately. Can you see the rubber tip contract and then stretch as you move it? Repeat the act for at least three times more or up to ten times.
- Pull it down some more
Reach for its limit. Push the plunger one last time, then, as quickly as possible, pull it away and break the seal.
If the clog is still evident after all these hardships, just simply repeat until you can prove yourself as incapable to solve this problem. This only means that your toilet is suffering from a major issue already.
- Call for help from the plumber
If all possible ways fail, it is better and safer to call for your neighbourhood plumbing professional. That person may be the last chance to solve that blocked drain in your clogged toilet.