4 Things You Need to Know About High Water Pressure
Any homeowner would find low water pressure both inconvenient and infuriating. Thinking that upping the water pressure would solve this setback, the homeowner turns to make the water supply pressure higher than what is suggested by the local water company. Unknowingly, the homeowner just made the situation worse for himself. Turning the water pressure high is no different than taking an iron pipe to your plumbing system and bashing it until it is completely deformed. Remember that most regional plumbing codes require the water lines to have the pressure at a steady 60-80 psi. To accurately gauge the pressure, install a water flow rate measurement to your tap and other water supply pipes.
To know more about high water pressure, here are critical information you need:
What is High Water Pressure?
This is another term for Excessive Water Pressure. It is only normal that the water inside your supply mains vary in volume and velocity, as well as, load pressure. This is caused by varying factors. Water pressure is an important factor to make the delivery of water to the homes a possibility. This is one of the driving forces that push the water through the pipelines. High Water Pressure would mean that there is a high driving force which, in turn, would in tail that the pipes receive more stress.
How can I tell that there is High Water Pressure?
There are several signs that often go unnoticed. These are:
- Noise from the pipes.
Gurgling sounds and other suspicious noises that come from deep within the pipe are often caused by extensive change in the pressure. Other times, these noises come in what sounds like crashing of two pipes together. They could also sound like creaking of the pipes as water pushes through with bruising pressure that stretches or heavily burdens the pipe.
- Forceful gushing of water from the tap.
Whenever the tap is in use, water does not stream steadily out of the tap. It comes in forceful gushes that are often filled with air. This is often caused also by low water pressure.
What are the probable causes?
- Situated at the bottom of the hill.
Because of the gravity, water runs downhill. If your property is located at the bottom of the hill and the water supply connection runs down to you, you will most likely have high water pressure at times.
- Problem with the local water company.
There are instances that your local water company will need to increase the water pressure in order to provide for the growing community. There might be a need for a stronger pressure to provide for the additional connections added to the main pipe to cater to the newer buildings and residences.
- Thermal expansion.
During the winter, there are pipes that have been frozen. Come spring, there will be a change in the pressure caused by expanding of the molecules that had remained dormant during the cold season. This change in the structure pushes the pressure to be stronger than necessary.
How do I resolve this problem?
For the sake of minimising this article, I can give you one very helpful and effective solution to fix the problem once and for all.
Install a PRV. A Pressure Regulating Valve must be installed on your main water line to reduce and regulate the water flow in your home to a sensible level. This step will also be instrumental in cutting your water bill into a reasonable pricing.