• 24 Hour Emergency Service
  • 0402 290 290

5 Easy Fixes for Leaky Pipes

plumberleichhardt pipe-leak

One of the most common yet the worst problem that could befall your plumbing system is a leaky pipe. When pipes leak, this is a small inconvenience in the pipe that would lead to different problems can actually be the cause of your entire plumbing system to collapse or other problems lesser in scale but no lesser destructive. To avoid situations like these, homeowners must be attentive to sudden pipeline changes to make sure that as problems develop, there should be a ready solution. Here are easy ways to fix a leaky pipe to prevent further damage:

  1. Tighten the Joints

The driving force of a leak is usually is not the clich├ęd reasons such as broken pipes and weak bearings of the material in your plumbing system. As unsuspicious as it seems, there is a great possibility that the cause is a loose joint. The joint of pipe fitting that is not properly tightened, is the more probably reason for leaks and other disasters inside the plumbing system. All you need to do in order to eliminate the problem or downscale the effect of the situation, is to tighten the joints and fittings by locating the weak points and using a wrench to turn it.

  1. Use a Compound Stick

A simple way to stop a leaky pipe from causing more problems is by rubbing a compound stick over the leak or crack. Before you do that, however, make sure that you have shut the source off and completely emptied and dried the pipe off. Fixing this problem while it still in a small scale will make sure that the problem will not have the time or the ammunition it needs to develop into a full-scale disaster. This item is readily sold in your local hardware store. Once you have the material at hand, proceed to rub the tip of the stick unto the leak to seal the crack and stop the flow of water.

  1. Using an Epoxy Stick

If you have located the source of the leak, you can use an epoxy stick to seal the leakage shut. The first thing you will need to do to make sure that the damage is not worsen, you have to shut the source of supply off and wipe the body of the pipe dry. Flatten the substance using the palm of your hands then apply it to the cracked area. To pack the paste material into the area in between the pipe fittings and joints, use a putty knife for a better result. Let the epoxy air out for about 20-25 minutes to let it dry and settle.

  1. Utilise a Hose Clamp

For do-it-yourselfers, this process can be a default solution for this problem. You will need a rubber patch and an automotive clamp for this method. Wrap the rubber on top of the crack and keep it in place by tightening the clamp around it. Make sure that when you place the rubber, it is directly on top of the leak and use the c-clamp to securely seal the opening. Second, to tighten the clamp, use the screwing mechanism present in the clamping tool. Remember that though this process is quite effective, it is nothing but a temporary solution. This why, for a better plumbing solution, contact your local plumbing service provider.

  1. Tape the Pipes

This method is effective given that the crack and leak is in a small scale. For you to apply any of the listed solutions, you must be able to locate the leak. Once you have done this, proceed to turn the shut of valve on to stop the flow of water from source to taps. Then, you can now tape the leaking pipe. For better solution, make sure that you have taped at least 6 inches on both sides. This is to make sure that there is enough coverage and that the tape would not easily come off. However, you still need to find a permanent solution since this is a temporary one.