• 24 Hour Emergency Service
  • 0402 290 290

How to Keep Your Pipes From Being Frozen

plumberleichhardt pipe-insulating

There’s a lot of trouble the winter season can bring such as heavy snows, power outage, and freezing temperature. Keeping yourself warm is one of your priorities during the winter; however, your plumbing system should be temperature during this type of season. Pipes shouldn’t be allowed to be frozen since it will cause many problems. The major issue with freezing is pipe bursts. Busted pipes will cause your water supply to flow throughout your household. Of course, this can inflict water damage to your belongings and house. Follow the tips below to safeguard your pipes and home freezing.

 

Cover the pipes with an insulation blanket

You probably already know this tip but it’s worth mentioning. Covering your pipes with an insulation blanket is one of the ways you can keep your pipes warm. The insulation cover will trap heat onto the pipe lining. This prevents it from freezing due to the cold temperature.

Be sure to tighten up the adhesive tapes so that the blankets won’t fall off. Cover your water heater as well since you’re already insulating your pipes and plumbing system.  Lastly, exposed pipes in the basement or garage shouldn’t be ignored. These pipes freeze faster and must be placed with an insulation blanket.  

Increase the thermostat heating

This tip is better suited for those who are living in old houses; specially houses that are structured over an uncovered crawl space. Anyway, you need to increase the temperature of the thermostat. This will help insulate the pipe lining in the crawl space. You should also seal the crawl space to optimise the heat distribution in the house. It’s true that increasing the thermostat will increase your heating bill but this method is effective. Besides, a busted pipe is more expensive than your increased heating bill.

Set-up a space heater

Insulating all the pipes in your house is tedious work and it may be too time-consuming. Putting a space heater near exposed pipes is a practical way to keep the pipes warm. This method will cover a lot of area and it’s less tedious than covering the pipes. Again, this way of heating pipes can increase your energy bills. It’s worth the increase bills since pipe bursts are a hassle to repair; not to mention costly.

Turn off the main water valve

Do you plan on leaving during the winter? If so, you should turn off the main water valve before leaving. Aside from that, you must also drain the water out of your plumbing. You see, pipes with stagnated water can freeze at a faster rate than pipes with continual water flow. It’s also an added security since there won’t be an unlimited surge of water in case the pipe bursts.

Turn the tap on and let the water drip

This sounds like a total opposite in conserving water but it helps in pipe freeze protection. As what you have read in the last paragraph, non-flowing water will freeze pipes faster. Turning the tap on will force your plumbing system to continuously pump water.