• 24 Hour Emergency Service
  • 0402 290 290

Water heater set up

Plan for the Installation

When you begin, check these next focuses to verify you’re primed to go when the new water warmer arrives.

Check the Plumbing

Measure the core to-focus extent between the hot and frosty water pipes on the highest point of the water radiator and attempt to guarantee the new warmer has the same extents. That will make the pipes work a spotless demanding. Examine the pipes interfacing with the old water radiator. Verify you have a gas union in the gas line, assuming that you have a gas water warmer, and determine there is a water shut off for the chilled water channel funnel and a union connector for the high temp water outlet channel. In the event that you don’t have these you’re occupation is a touch harder as you’ll need to slice the channels to evacuate the old warmer, then introduce the chilly water stop valve, and / or gas union or heated water channel union. In any case most handymen completed the right employment in the first place so surely everything is set up.

Water heater set up

Getting the water radiator off the truck and down the stairs (assuming that you have a root cellar establishment) is a two individual employment. I likewise prescribe leasing an apparatus dolly if conceivable. For around $20/day it makes cutting the new radiator down and the old warmer up a ton less demanding. They are massive and overwhelming. When you have the new warmer, cut down in the area of the old radiator you’re prepared to go.

Turn Off Utilities to Water Heater

When you do anything, you need to turn off the utilities to the existing water radiator.

Turn off the water at the home’s primary water shutoff valve or the shutoff valve in the chilled water supply line hurrying to the existing water radiator.

If you have an electric water radiator, stop the power to the water warmer by uprooting the breaker or turning off the electrical switch on the water warmer’s circuit.

If you have a gas water radiator, turn off the gas at the gas supply pipe at the tank or at the primary gas shutoff valve to the home. To determine the gas is off check the pilot light, it ought to be out.

Channel the Hot Water Tank

When the water is turned off to the radiator you have to empty the tank.

Open the closest high temp water spigot.

Attach a hose to the channel valve on the water radiator.

Place flip side of the hose over a stereo channel.

Open the channel valve gradually so residue does not stop up the